Thermakraft 397 is a fire retardant, light diffuser, high strength foil insulation & vapour control layer used to line walls and under roofs in commercial and industrial building to give a clean white finish.
Water Barrier / Vapour barrier
Synthetic insulation foil and vapour control laminate
Provides extreme tear resistance & low shrinkage
High tensile strength
Stiff product for ease of laying
Provides a quality white aesthetic finish, increasing light diffusion and reflection when installed with white surface facing down.
Metalized Polyolefin/non-woven/UV white film
Basis Weight (g/m²):
Roll Sizes (m²):
1350mm x 55.6m (75m2)
Roll Weight (kg):
pH Extract (pH):
Requirement: ≤ 2%
Max UV Exposure (days):
Emissivity Foil Surface:
Direct Fix Absorbent Cladding, Direct Fix Non Absorbent Cladding, Direct Fix Metallic Cladding
A premium white polypropylene tape, using the latest in acrylic adhesive technology which can be used on synthetic wall & roof underlays, foil products
or damp proof membranes such as thermathene. The tape is also ideal for sealing edges of vapour control layers, ducts and underfloor foil insulation.
Extruded three dimensional synthetic black mesh, used as an air separation layer between fully sarked roof, and roof cladding. Provides a path for air
passage, ventilating potential areas of condensation or moisture accumulation and facilitating drying.
Galvanised Safety Mesh, complying with AS/NZS 4389:1996, for use in commercial roof applications where falling from high hazards exist. Also used to support Underlays where spans fall outside recommended distances. The longitudinal wires are spaced at 150mm centres with crosswires spaced at 300mm centres.